Box dividers

[Arkansas Metal Art]

14g box dividers for a customer. 76 dividers broke on two sides. Break lines sure make it easy. Second pic is dross right off the table. Having really good results with 14g.

 

[LECS Mark]

What are your cutting parameters for 14 gauge? HRPO?

 

[Arkansas Metal Art]

What are your cutting parameters for 14 gauge? HRPO?

Its just HR.

210ipm
45amps
85volts

Shielded fine cut consumables on Hypertherm powermax 85.

 

[LECS-Chad]

14 ga is perfect fo rthe smaller projects. one of the sizes we use the most. Im at the same settings!

 

[OcalaWill]

When you do a bend line (cut) is that just a line with online cut path or is there a closed narrow rectangle to it? I have never tried that. Looks great!

 

[Arkansas Metal Art]

Just a straight line with an online tool path. Works great for stuff like this. I usually leave 1/4" at the connection points. Then just break it over the edge of a table. Any less than 2 or 3" on either side and it works best to sandwich it in a vice between two pieces of angle iron that are longer than your part.

 

[OcalaWill]

Thanks!

 

[LECS-Chad]

and if you want the "solid" look then you can fill weld the bends and grind. smooth operator.