open pilot flexcut 125

[vdubster]

ive got a flexcut 125 and the pilot stays open after one cut. this happened yesterday and i cant get this resolved. ive replaced all the consumables with new ones and when i plug the air back into the back of the 125 its still blowing out air. i also hear in a couple of spots air hissing out within the 125. need help or suggestions on fix asap. thanks

 

[LECS Hunter]

ive got a flexcut 125 and the pilot stays open after one cut. this happened yesterday and i cant get this resolved. ive replaced all the consumables with new ones and when i plug the air back into the back of the 125 its still blowing out air. i also hear in a couple of spots air hissing out within the 125. need help or suggestions on fix asap. thanks

Good morning, if the issue persists, give Torchmate support a call (775) 673-2200 or submit a support ticket here: https://torchmate.com/technical-support

 

[vdubster]

ive called and emailed torchmate support and am waiting for a response

 

[vdubster]

after a phone call and some figuring out the flexcut is being sent off to a tech somewhere local. hopefully nothing major. thanks for the help FF. appreciate it