Blue AVHC lifter

[BlueSteel]

Lifter is a little noisy coming down to touch the plate but quiet going up. That normal? I lubed it up

Also why in the world is that little smart motor so expensive? saw it online for $1500! That's half the price of the entire avhc setup

 

[Dnmeistr-LECS]

Too much lube is a detriment has diminishing returns, keep it well cleaned and very lightly lubricated a couple drops of 3 in one oil on top of bronze nut is all you need. As well as wipe chromed guide rods down with silicone spray, spray on a rag and wipe the rods down.

 

[BlueSteel]

Will do. Any idea on the noise?

 

[Dnmeistr-LECS]

Noise is either coming from lead screw/bronze nut or the bushings inside the lifting block.

 

[BlueSteel]

Dirt or time to replace parts?

 

[Dnmeistr-LECS]

I would go through it dissassemble and clean everything, clean the lifting block as you would a gun barrel, run pieces of rag down through the bore holes, clean guide rods with silicone spray, clean lead screw with wd40. Reassemble and lightly lubricate bronze nut/lead screw with 3 in 1 oil by using 2 or 3 drops.

 

[BlueSteel]

anyone remember the name of the company that made the blue screen avhc?

 

[BlueSteel]

found it

Onexia

 

[BlueSteel]

ignore me. the correct company is
Kyndill