Vaderbuilt a sign for a scooter company group

[Marc]

Here is a little project for a Vespa Scooter group.

 

[Arkansas Metal Art]

Nice. I like the offset. Cool idea.

Did you manually node edit all the letter connections? What did you use for spacers between layers? Is that rusted or painted brown and rubbed? Looks good.

 

[LECS-Chad]

Turned out nice. Good use of the drop.

 

[Arkansas Metal Art]

I just noticed the missing dot on the i. Nice illusion.

 

[Marc]

Nice. I like the offset. Cool idea.

Did you manually node edit all the letter connections? What did you use for spacers between layers? Is that rusted or painted brown and rubbed? Looks good.

No manual editing, I imported a black and white graphic, I used #6 nutzert for the spacers then I countersunk #6 pan head screws, I created the rust with the following procedure:

Mixed muratic acid in a 10% solution with water
I wiped my piece with thinner to clean any oil off
I sprayed the acid solution with a spray bottle outside, no wind, gloves a must, mask and eye protection in case of a gust of wind
Wait 24 hours
Rinse with water to neutralize the acid, and I hit it with a streight stream to make it look irregular
Let air dry
Clear coat with high gloss from a can
That's it.