Accumove 2 and Hypertherm 45 Wiring Questions

[Trenton Pigeon]

I recently purchased a Lincoln Electric plasma table. It runs with an Accumove 2. I'm using a Hypertherm 45 plasma cutter. I'm have a difficult time wiring everything up. Can any one shed some wisdom. anything will help!

 

[Larry Cameron]

I WILL BE INTERESTED IN THE ANSWER AS WELL AS i USE HYPERTHERM AND THE UPGRADE OPTIONS FOR ME TOO WITH BE FROM THE AVHC AND SIGNAL GENERATOR TO ACCUMOVE.

Larry
NZ

 

[Kchoghead]

http://torchmate.com/machine-assembly-instructions

Scroll down t0 Growth Series

 

[LECS-Chad]

Hopefully that HT45 has a CNC port and you have the CNC interface cable. Two pairs of wires come off of that. red/black OK TO MOVE and green/black PLASMA ON. The RAW ARC VOLTAGE will need to get hooked up inside the machine.