That fixed the Z axis problem. Im still having the problem of the torch diving into the material and tripping the breakaway. Lockout is not...
Okay, now I can't even run a file. I set program zero, reset Z position and it says Overtravel Detected and I have to redatum the machine. Try...
Ok, I have been watching the lockout light, and it doesn't illuminate when it approaches a corner, until the very last one. (cutting rectangles...
Powermax 105 .25" Mild Steel 45a 48ipm 137v Hole size is .5" Software version is 1.0.20
Okay, just started the file over. Monitored voltage in manual mode, and set the software to that voltage(which was 137v). Cut the first part...
Okay, that appeared to help with the diving so far. If you have a nest of parts, is there a way to "jump to" a different part to cut, like there...
These are my machine settings. Just went out and tried it again, pierces, begins to move and slams down into the plate. Something goofy is going...
We're still having problems with this. cut a few parts today without an issue, then torch dives on a hole and stops the program.
Yes I've changed consumables out, and it still does dives.
Thanks, I sent the file off ATTN to you.
I have tried it with sampling on, but in cases where you're cutting holes and then an external shape, it gave me a much higher cut voltage
We recently retrofit accumove 3 onto our X table. I'm having problems with the torch diving suddenly and tripping the breakaway. Set to Auto...
[ATTACH]
Ok thanks for that. Im having issues with the breakaway being tripped during ohmic sensing. Another question - What is the best way to square...
Is there a way to adjust the magnetic strength on the accumove breakaway? Occasionally, when the torch senses the plate, it "opens" the breakaway...
Separate names with a comma.
