I was a bit too soon to post. I restarted everything and it looks normal again. Will try cutting tomorrow
I've been gone again for while with work. Came back and talk with the tech support, they said it sounded like some control chip in the accumove...
Ive heard that if you change a logo or design up to a certain percentage it no longer falls onto a copyright issues, somewhere along the lines of...
A good quality notcher from JD2 or Baileigh would help you out with production quantities. For hobbyist like my self the cheaper notchers or just...
Assume I don't know what I'm doing if you must. But now its gotten to the point of a completely different outcome EVERY time i run a cut file. It...
I'm having a hell of a time too trying to cut nice and neat bottle openers for my wedding. The problem I've seen is the work height for 10g...
I haven't used the table (4x4 growth, accumove 2) for a 4-5 months and had a project come up a week ago. Cutting 1/2" plate steel for light pole...
Well that's a bummer. Thanks for the info. So do the new tables fit a 48x48 or a 48x96 sheet?
[ATTACH] Howdy peeps, I took a few months off and went back to the mother land (German!) had a great time and made a couple signs for some...
And here is the view of CAD when generating the G code for a test file. [ATTACH]
Here you can see it goes to the inner circle of this test file, cuts it out and then cuts it way to the outer. [ATTACH]
Here you can see that it wants to cut out the "O" first, so it drops the torch and cuts over to the "O", then raises to go to the next shape....
So I planned on leaving for a road trip to montana and idaho tomorrow and desided to turn out some signs for my friends i'm staying with. I made...
Not to high jack the thread but how would you dial in this cut quality issue? The lines are cutting smooth and the image looks jagged. Not sure...
I bought a cheap $300 "all-in-one" computer from amazon to run the VMD and during the initial start up I accidentally clicked the ok button to...
When do you use AUTO mode? I've ran a couple jobs where it get about 80-90% of the way through and the torch hits the material because its not...
Using a powermax 65 with 45a fine cut consumables cutting 1/8" mild steel my cut speed seems to be all over the place. Using the line speed test...
Hey guys, I just got my table going tonight and Im having a hell of a time getting it to make multiple cuts. It'll make 1-2 job cuts (line speed...
What it HRPO?
I would think an english wheel and then a really good tig seem. What about finding a shaker close to the shape and then adding legs and...
Separate names with a comma.
