What is considered the drive side of the gantry? Which end is this going from? Is this done off the end with the fill valve or the opposite end?
Where do I do this from and to what? Is there a written procedure anywhere that states how to do this?
Lately I have been having squaring issues with our Torchmate 6 X 14 Table X. We cut a couple of pieces out of the same piece of 7 ga. The pieces...
I have a Torchmate Table X 6 x 14. I would like to know what is the maximum width I can cut. I have a circle I have to cut that is 76" in...
How is that possible? I only did the tool path once. When the program is running, it will cut the same item in the program 3 times. Example, I was...
I am having problems with my programming. My Torchmate software is on a different computer than where the VMD controller is. It seems that I check...
I am having problems importing text from my dxf. When I import in the dxf with text, some text comes in others doen't. I am trying to have created...
We don't turn those off. We always are using those features. This table has been giving us different problems since we got it up and running. It...
We are cutting at book settings for our Flexcut 125. We just slow the ipm down a little. We are currently running at 30 ipm and 105 amps. The...
It pierces then when it starts to cut it nose dives into the material. We always have the AVHC set to auto and sample voltage on. We have tried...
I have my machine up and running. We have been trying to cut 3/4" plate, but we have issues. The first one is that the head always go done to the...
Am I able to cut AR material with my Torchmate Table X with Lincoln Flexcut 125? I have a project that uses 1/4" AR material. What about thicker...
I have an Accumove 3 controller with a Flexcut 125 plasma unit. The table is a Table X 6 x 14. When doing a dry run of a program my torch head...
I am trying to cut this design which I will attach to the post. I want to have the white cut out between the ears. Then the white around the black...
We are running the Accumove 3 system. We are using VMD version 4,0,42.
We got the plate marker to work. We tried the program that was for the weld gage. It marked the material with the plate marker but then it moved...
The timing issue is with the plasma torch not the plate marker. I believe my tool # is 1 for the plasma torch head.
I have a couple of questions. The first one is about the plate marker attachment. What is the procedure to adjust the height of it? The water...
I was talking to a support rep about some issues with my table. I asked him about how to get my material square on the table. He told me about...
Separate names with a comma.
