Using multiple layers of metal can increase the cost, but at least you can use spray paint instead of painting it all by hand! But it all depends...
Very cool! What color are you going to paint it? Clear coat?
[MEDIA] This is a map of the United States that came about because we wanted to utilize the plate marking accessory that comes as a $2,450 upgrade...
[ATTACH] Here's a picture of the ones we use. Hope that helps!
Those wire wheels are great! I haven't had the wires come out of the disk very often; they definitely deteriorate over time, but it has...
[MEDIA] Standard coffee tables are four feet long by two feet wide with a standard height of around 18" high. We wanted to match these dimensions...
Alright, I finally finished decorating the shelf. Here's an updated picture of it. [ATTACH]
Hey Chad! Do you have any details on the angles at which the flat plate was bent?
I believe there is a schematic of the hand torch on page B-4 of the FlexCut 80 manual. If you can't find it let me know! Thanks!
Curving text along a design is only possible with the ProText Module upgrade to Torchmate CAD. If you didn't make it a point to purchase it, it...
We recommend replacing the swirl ring, retaining cap, and shield cap only when clogged, cracked, or corroded. So it is more rare to replace those...
This thing is huge: 93" wide and 44 inches tall. I'm still in the process of filling it with books and plants. So hold tight on the updated...
Did you use LEDs to light the backside of the cut out? If so, where did you buy them?
I'm not sure who made that sign. I agree, it does look cool.
I never mismatch consumables and operating amperage. The video shows the 20 ipm cut speed at 40 amps with 40 amp consumables in the torch. The...
I am definitely going to have to try soaking my parts in vinegar. I've heard of certain acids doing the job, but I've never heard that a...
This looks great! Did you provide anything that the customer can use to hang the piece?
I saw this design cut out of plywood on a CNC router machine that was held together with zip ties, so we decided to make our very own design that...
Here's another video on how to rip cut your material. This can be a very useful tool when you need to cut metal sheets into smaller pieces, or...
Those are looking good Dan! Are you starting to accumulate a cut chart of all the settings that you have dialed in on your table?
Separate names with a comma.
