Recent content by Tyler Olson

Good Point. I have a Torchmate 4800. When i said we checked the ground, we used a Multimeter and checked the Resistance and it was below what the max allowance is. for the error code it is 0021 Work Transfer Fail.

So we have had are table for a year now and have been cutting a lot. In the last few month we have been having a lot of problems. The software will loose its zero and moves the part inside the program to a different location. For example it will start a cut and the plasma with throw a 0021 error...

Most Multi process welders are only going to have DC tig which would not get you Alum. However if you find a package deal on one it might include a spool gun that can be used for Alum. I am a big fan on the Esab rebel. A good Multi-processor is going to be pushing your budget and then some.

This thing is Awesome!!

Has anyone made anything special for there forklift? I have to find a safer way to load 3/4 sheets then what we are doing now.

quick update. The problem ended up being a bad break in the panel box.

Did looks in owners manual and the machine says "work Transfer Failed" the unit has 100psi coming in from the reg and the machine is set to 60psi, and tried changing all parts with no changes. Called Torchmate and spent a lot of time on the phone with them and we went over everything. They have...

I was hoping maybe someone can shine some like on my issues. I have a torch mate 4800 with a flex-cut 125 and was finally trying to do some cutting and when the plasma tried to arc i would get the error 0021 code each time. I had a step up transformer installed in my shop to get the power...