Recent content by LECS Tim

There is a program for mac called bootcamp that some of our customer have used to get windows based programs to work on their MAC including our CAD/CAM.

when you save a file as a GM you need to Go to Machine/ Output When that window pops up on the top left you should see a drop down window labeled Device in that drop down it should say Accumove Imperial. if it says torchmate dual tool driver , it will save as an fgc.

Understand I am no expert but "Roll formed steel" is more of a process then a product. I would say go HERE see if you can find what you need then find someone near you that sells it. I hope that helps.

What's next for you? hydraulic leveling legs ;)Looks nice, great job :D

If you want an easier way to add it to a file you are creating just do this " Hold Alt down and on your number key board type 0174" ® this will work in our CAD as well as a windows function. Don't know if that was your question but here you go anyway :) you will have to add bridges so you don't...

John, In most cases this is going to be a mechanical issue from the table needing to be squared to the gantry being readjusted, sometimes just a small set screw adjustment will fix this. http://torchmate.com/machine-help/Table-Motion-Issues try this link out. I'm sure this will be an easy fix...

This started on Jun 12, 2013 the videos I'm guessing are dead links, they did it up to 2015 so far,I didn't see anything for 2016. The sign was made for the event, the entries in the contest were much more extravagant, moving parts ect. It was a build off. We had our first Build off in Reno this...

It harkens back to the days "Made In America" meant you had something that was going to last. That bench will be as beautiful in 30 years as it is today.

Was that style sign made in the 50's ? I know its early Crossbuck design

Part of that story was this Link ;)

I copied this post from Jim on a different site When you switch to the expanded metal mode on a Hypertherm system... line with two dashes.. The system senses the loss of current flow through the metal and switches back to pilot arc current at high speed to maintain the arc. As soon as the...

Have you replaced the Gas Filter Element in the Hypertherm? https://www.hypertherm.com/Download?fileId=HYP110872&zip=False

Not as separate files you can't, you would need to combine all the files in one CAD gm file for that to work.

Yes, :)

The only way you could get the graphic back to text is if you haven't closed and saved the file . Once you close and then reopen the file it is now only a graphic. Of course if you were working on the file and decided you wanted to change, as I'm sure you know is the back button. If this a...