Any Ideas why the torch does this?

Made the cut file loaded on to Accumove and ran a test with the torch off all seemed to be ok. Reset and started a live cut. Cut the first piece ok then for whatever reason the torch got a mind of its own. This is the second time this has happened. Running torchmate version 9. Have only had the machine since December last year.IMG_0134.JPG IMG_0135.JPG IMG_0136.JPG IMG_0137.JPG
 
I would contact Tech support. Looks like either you are getting a bind somewhere in the machine or the wrong config is loaded causing the rapid travels to be too much for the machine to handle.
 
Back
Top