Positive Cut Angle- Standoff distance adjustment

Hi ,

I am getting positive cut angle on my cut parts. How do i adjust my torch standoff distance. I am unable locate the settings.

I am using Burny Kaliburn. phantom spirit 275 with torch mate plasma.

Thanks in advance.

 

If you have an Inova height control would recommend reading the Inova manual this controls all functions of the z lifter and height control, can download from their website http://www.burny.com/downloads.shtml.

If you have the black box with blue display then the pierce height and init cut height are set on this box. See video link on using the Torchmate height control,

 

Thank you very much