Pan table leaking

Has anyone had the water pan start to leak. Looks like its under the rail guides. I'm sure its were water was trapped this summer. Thin plate, welding would be difficult, any suggestions on good epoxy or something similar. Would the water additive help this from reacquiring. Or any other suggestions.

Thanks for feedback.
Scott

 

If it is leaking from a seam or small hole I would use 3m 5200 marine sealant

 

I talked to a industrial supply store. Using an epoxy to seal. May need to fab our own pan sometime soon if this continues.

Thanks everyone for the feedback.

Scott

 

Are you sure its leaking or i it the splash over on the sides. If I look under mine you can see what looks like leaks under the side rails but it is actually where the water splashes over and drips between the side rails and the pan. There is no water proof seal there. using a flashlight you can see light between the two. If you have a 4400 or 4800 its a good idea to move the Accumove from under there also since the water drips down onto it every time it splashes over.