Recent content by LECS RC

  1. LECS RC

    DCB Season 3 - Hitch Wagon S3E6

    This week Chad wanted us to build him a hitch wagon so Aaron came up with a drawing. After cutting all the pipe we cut some caps, welded them on and ground everything smooth. After welding the frame up we started cutting and tacking the expanded metal onto the frame. Cut Parameters...
  2. LECS RC

    Printing trouble

    What is the size of your part, it looks way bigger than the material blank. Also before you go to print press ctrl+A on the keyboard and look in the top left part of your screen. It should look something like this, the # may be different. If it looks like the next picture you have more than...
  3. LECS RC

    Printing trouble

    press fit to page button at the top of the screen next to the setup button on the left. Each of those blue rectangles are a page when printing, that is why you are getting 30 blank pages and only a few of them will have lines on them. I would also try turning your show fill on if you don't just...
  4. LECS RC

    Metal Door Panels.

    Mikhail, I would love to see what you have made. These doors I had powder coated since I needed a very specific color.
  5. LECS RC

    Metal Door Panels.

    Here are the final products Back side of door Other Door
  6. LECS RC

    Metal Door Panels.

    I have some friends that are building a house and they wanted some custom doors inside there, here is what I did for them. I started out by using Torchmate CADs Scan and Trace Wizard function to import pictures from the internet. After a couple hours of editing and sizing to fit, these are the...
  7. LECS RC

    Machine and /or operator assistance

    Is the plasma not piercing all the way threw the material or piercing, not moving, and then going out?
  8. LECS RC

    TM Cad question. Grid lines missing?

    This usually only happens when you open the CAD program again after it is already open.
  9. LECS RC

    TM Cad question. Grid lines missing?

    Go to Option > Torchmate Setup > General Preferences... in the pop up, towards the bottom right, there will be a grid size entry. Just enter preferred grid size.
  10. LECS RC

    Cut sequence changes

    If you are doing one tool path i.e. Male, like you lighting post, and still having problems finishing a part before moving to the next. You have to make sure that your show fill works, if it doesn't make path. If you are doing two tool paths or more then you have to select all the male pieces...
  11. LECS RC

    Image Drawn in TM CAD

    Image Drawn in TM CAD
  12. LECS RC

    Single line lettering/writing possible?

    If you have TM CAD you can use any font. All you have to do is type your word then go to the scan tools and select center line. Then delete the letters and you have a line font. Select the lines and create an online tool path and your golden.
Back
Top