Recent content by Jerryandre71

  1. J

    Plater marker tip

    Great thank you!
  2. J

    Plater marker tip

    Good day everyone, Does anyone know how to replace the tip on the plate marker? Mine is broke, i have a new one, but cant find any instructions. Thanks, Jerry
  3. J

    Operated Table Without Side Covers and The Rail Bearings Fell Out

    3K price sounds way high to me. I used to build machines with linear rails and bearings. Bearings ranged in price from $60-$200 each depending on type and size. Once you have replacement sliders they aren't to hard to swap out if you needed to. But glad you go it working!
  4. J

    Large Radius End Caps for Vending Machine Housing

    I am in Palm Springs California. Not to far from Los Angeles. There are a lot of fabrication shops over here. Have you considered ordering and shipping from out of state? Might help in the short term while you find yourself a machine to do in house. Looks like you may want 18g material and...
  5. J

    Cutting 3/4" Mild Steel

    I have Torchmate 4510 with a Flexcut 80 and was able to cut a sheet of 3/4" mild steel with the following settings. Thought I would share the results in hopes it will help someone else and maybe get some feedback. Could be better and I will work on it as I can. There was a fair amount of slag...
  6. J

    corner loop cut path

    I want to try cutting with a cut path as shown in my user guide called corner loop cut path. I am producing the drawing in a cadd program and importing as a .dxf into Torchmate Cad How do i produce this cut path?
  7. J

    Adjusting Cut Parameters

    I am trying to adjust cut settings on my machine (4510 w FlexCut 80) manually. I have a drawing i produced with a cut speed of 12 (trying to cut 3/4" mild steel) On the process screen i changed the cutting speed to 9. But on a dry run the feedrate still shows a speed of 12. Do i need to redo...
  8. J

    Plasma cutting Brass

    Does any have any experience or feed back cutting 1/8" 260 brass? Any info will help Thanks!
  9. J

    Datum Error

    I have a new machine, 4510 got it 6 weeks ago It appears that the Y axis motor on the left side is not engaging the rack properly. I get datum errors. It takes several tries before it homes properly. If I then move the machine the carriage is jerky. One side is moving out of sequence with the...
Back
Top