Recent content by Jeff Tures

I don't think the 185 is an inverter machine is it?

No auto, but it does have defaults.

That's what Lincoln has printed all over their directions. See Attachment.

I'm using 2% Lanthanated. I was looking at articles on Welding tips & tricks and read that maybe I had the argon set too high. I'm not sure were that should be exactly. I made a few adjustment and now I'm getting a puddle. I used a tig in school about 6 years ago and had no problem with aluminum...

My setting were 140 amps, 60% EN and 122hz Jeff

I've recently bought a 200 Square Wave Tig machine. My experience is limited with tig. I seem to be able weld mild steel OK, but 1/8" aluminum I'm trying to weld is a nightmare. I have it set on AC Tig and the other settings as the manual says to do. Buy the way Lincoln, your manual sucks. All...

I don't have Accumove 2 but on 16 gauge Jim Colt told me to move my cut height from .06 to .075 and it made a big difference. I have a machine torch....not sure if that makes a difference or not.