Recent content by inkognito

All Torchmate controllers can execute files of infinite length, ie there is no size restriction. Send the file to CS for testing.

The backend isn't always defining the default feedrate causing the error to be displayed. There's 2 opinions, 1 saying run with a default feed if undefined and another stop and report an error. The probability of default feed being correct is close to nil, therefore why bother and just display...

You may find jogging the torch close to the position you wish to resume easier than touching on the graphics. Jog torch to resume position & press 'Resume From Torch Position'. The crosshair will show the relative position of the torch to the graphic as you jog giving a visual aid, useful if...

symptoms indicate input 1 is permanently asserted resulting in the controller believing the arc is transferred on M64 but not detecting it's deasserted when the arc is turned off with M65 does the start of cut look poor due to the system not waiting for the arc to transfer? if true then this...

You cannot brick the controller.

You're hearing the winding current being regulated by chopping them at a fixed frequency of around 22KHz. The phase current is modulated using pulse width modulation to support micro-stepping which gives finer resolution, smoother and quieter motion than either half or full step. You'll likely...

Accumove 3 is an industrial robust product that's CE certified being compliant with EN61800-3:2004 +A:2012; EN55011 (Radiated and Conducted Emissions), EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6. If a choke were to be fitted it is best placed near to the controller however...

accumove doesn't support wireless natively you'd connect accumove to your wireless switch across lan or connect accumove to a local wireless AP that has a lan input. the AP connects wirelessly to your dhcp server/router i assume your pc is already connected to the dhcp server across the lan. you...

The topology you have determines how it should be configured. Describe your setup

The relay gates the ohmic input. If the material surface is detected as you seem to indicate then the issue is not associated with ohmic sensing. The procedure is drive on to material, retract to pierce height, assert plasma start, wait for arc to transfer (cut sense input indicates its...

It's very important you read your product manuals before cutting aluminium.

Purchase Vmware fusion, create a Windows virtual machine and it will run fine

You can digitise an origin or manually enter a home offset to add a translation. The simplest way to setup is generate the cad file with the origin at (0,0). Use plate alignment to digitise a corner and edge of the plate. The controller will automatically calculate the translation and rotation...

If you cut dry run a large square and time the movement for each side for a given feedrate is the time consistent. I want to validate the correct configuration file is selected.

The axis will jog faster the closer your finger or pointer is to the tip of the arrow. If you are jogging outside the axis limits which will be absolute position of <0 or >24" or 48" the velocity will automatically be limited to about 2%. Datum the machine, press either jog key close to the...