Recent content by Andrew Heyn

I am trying to cut holes in a piece of 7x9.8 channel with the legs down on the plasma table. The legs are 2 inches tall and the web is 1/4" thick. I set the material thickness to mild steel 1/4" and the retract and transfer height to 2 1/4" This works, but the torch hits the steel pretty...

I finally figured out how to set the cut path origin in the center of the part. Under "Machine" "Machining Defaults" "Setup" There is a grid on that page that allows you to set where the Origin starts and ends. When you are done you need to change the settings back to the lower left corner or...

I'm trying to plasma cut holes out for a flange bearing in a piece of channel. I need them to be precisely located in the center of the channel. I have drawn them on the Torchmate CAD CAM, but it always sets the origin at the lower left corner when I show the cut path. I would like to set the...