LECS-Chad's Recent Activity

  1. LECS-Chad replied to the thread Rotating GM File in VMD.

    have you tried 270 ?

    Aug 16, 2017 at 7:01 AM
  2. LECS-Chad replied to the thread torchmate control software 4.5.17.

    Ahhhh... now I understand. Sure contact the parts department and they can send you a quote. 8665711066 ext 3.

    Aug 16, 2017 at 6:50 AM
  3. LECS-Chad attached a file to the thread Torchmate CAD question.

    Yes. select the PENCIL TOOL. Select the first tool. [ATTACH] Then at the top you will enter in your numbers for your setup....

    upload_2017-8-15_15-17-9.png upload_2017-8-15_15-18-13.png Aug 15, 2017 at 3:20 PM
  4. LECS-Chad replied to the thread Rotating GM File in VMD.

    it works counter clockwise based on the x0 y0 coordinate you have your file saved.

    Aug 15, 2017 at 3:15 PM
  5. LECS-Chad replied to the thread torchmate control software 4.5.17.

    Weird FlashCUT didnt sell you the software too... Your box should already have an empty 4th axis card. Motor would just plug into...

    Aug 15, 2017 at 3:15 PM
  6. LECS-Chad replied to the thread torchmate control software 4.5.17.

    The "4th" axis on the machine is turned on/off through CONFIGURATION/SYSTEM/MOTOR SIGNALS. The rotary would take the X and not the A.

    Aug 15, 2017 at 11:52 AM
  7. LECS-Chad replied to the thread Torchmate CAD nesting failure: Invalid state.

    well if you run the setup it will modify your install so really from a install perspective it is pretty painless as it doesnt remove or...

    Aug 15, 2017 at 9:23 AM
  8. LECS-Chad replied to the thread Torchmate CAD nesting failure: Invalid state.

    Well you are here and that is all that matters. A few things that stick out in my mind regarding this file. 1. Multiple layers 2....

    Aug 15, 2017 at 7:42 AM
  9. LECS-Chad replied to the thread Torchmate CAD nesting failure: Invalid state.

    Sorry to hear your frustration with the move to an independent site without all of the ads, requirements, and garbage information... but...

    Aug 14, 2017 at 2:46 PM
  10. LECS-Chad replied to the thread Trying to cut this out.

    Fun... To use the SCAN and TRACE wizard will have to be a JPG and not a PNG. Open in PAINT and resave as a JPG. FILE/ACQUIRE...

    Aug 14, 2017 at 2:33 PM
  11. LECS-Chad replied to the thread Design help.

    do you have TRANSFORM/FIT TEXT TO ARC?

    Aug 14, 2017 at 2:28 PM
  12. LECS-Chad replied to the thread 4800 plasma pierce movement issues.

    Double lines is a graphic/redraw issue and isn't an issue up to just visually being a distraction. Usually it shows when doing a RUN...

    Aug 14, 2017 at 11:02 AM
  13. LECS-Chad attached a file to the thread height controller issues.

    If the lifter moves up and down with the JOG SLIDE feature but not for CUTTING then there is too much resistance in the lifter station...

    Aug 14, 2017 at 10:02 AM
  14. LECS-Chad replied to the thread 4800 plasma pierce movement issues.

    I would recommend calling into support as it seems either you are having sequence issues/settings or something. Also verify that you...

    Aug 14, 2017 at 9:57 AM
  15. LECS-Chad liked SegoMan Designs's post in the thread Outdoor business sign.

    Dawg gone good job

    Aug 14, 2017 at 9:55 AM